Car Wheel Balancer

Clients can avail from us a wide range of Car Wheel Balancer, as we are manufacturing and supplying these products as per their needs. Our range is finely designed and offered at most affordable price.

HOFMANN Truck Wheel Balancer Videographic Model - Geodyna 4800 2l

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Product description:

The truck wheel balancer geodyna® 4800-2L measures both the static and the dynamic portion of unbalance and hence increases truck wheel life considerably. The balancer is equipped with a TFT wide-screen monitor and asanetwork capability.

Key Features

Automatic input of offset and rim diameter (2D SAPE)
Input of rim width via capacitive keypad
Electronic friction brake to retain the wheel in any position
Patented virtual plane measurement (VPM) technique
Weight tray with 27 weight compartments and shelves for car cones and weight pliers
Measuring speed less than 100 rpm
Automatic braking of the wheel after measurement
Automatic static and dynamic unbalance measurement in a single measuring run
Cone adaptor with spacer and light-truck cone of 120 – 170 mm diameter
Gauge arm with patented wheel weight clamp to input wheel data and position adhesive weights
Hidden weight mode
Patented optimisation mode
19“ TFT wide-screen monitor
Comprehensive on-line help in more than 25 languages
asanetwork capability

Technical Features

Shaft diameter (mm)	40
Measuring speed (rpm)	< 100
Measuring time (s)	> 20
Display (LED, LCD, TFT)	LED(s)
Monitor (inch)	19
Rim width (inch)	2 - 20
Rim diameter (inch)	8 - 26
Rim diameter - manual input (inch)	8 - 30
Wheel width max. (mm)	650
Wheel diameter max. (mm)	1300
Wheel weight max. (kg)	250
Wheel distance input	semi-automatic / gauge arm
Input of rim diameter	semi-automatic / gauge arm
Input of rim width	manually
Power supply
Width (mm)	1370
Depth (mm)	1465
Height (mm)	2005
Weight (kg)	238
Noise level (dB(A))	< 70

Yes! I am interested

Gloss Meter PicoGloss 560 MC Elektrophysik

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Gloss Meter, Model : PICOGLOSS 560 MC, Elektrophysik – Germany
DesignThe PICOGLOSS 560 MC is one of the smallest portable gloss measuring devices ever designed. It is smaller than a PC mouse and therefore ideal for on-site use. The universal 60° measuring geometry and the automatic change-over of mirror-gloss make this instrument suitable for a wide range of applications. Because of the compact dimensions of the measuring instrument and the measuring aperture gloss measurements can be carried out without difficulty even on small or narrow specimens as well as in places which are not easily accessible.
Handling Single key operations make gloss measurements extremely easy and comfortable. The reading remains stored in the display for about 30 s and is then switched off automatically to save the battery. However, the last measured value is preserved and is shown in the display when the instrument is switched on again.
Display In addition to the measuring and calibrating values the high contrast LC display also shows messages and information.
Calibration
The PICOGLOSS 560 MC requires only one calibrating standard for normal two-point calibration. After key pressure the calibration routine runs automatically. The calibration value is stored on the standard (EPROM).
60° Gloss measurement Specifically for gloss measurements on lacquers and plastics in the range of 0 - 150 gloss units.
Mirror gloss measurement Mirror-gloss measurements can be conducted on metallic surfaces in the range of up to 1000 gloss units. There is an automatic change-over of the measuring range at 150 gloss units.
Detection of external light The effect of external light can be determined by conducting measurements with the lamp switched off.
USB interface
The measured data can be transferred to a PC by means of the USB cable supplied and evaluated using the software PICOSOFT II *).
Power supply The PICOGLOSS 560 MC is operated by a round cell, the capacity of which is adequate for at least 10,000 measurements. When using a PC, the power supply is taken over by the USB interface of the PC. Reference Class: The PICOGLOSS 560 MC is supplied with a Manufacturer’s Certificate M in accordance with DIN 55 350-18 that includes among others the following information: Actual and setting values of the gloss standards, product identification, test equipment used with calibration status, date, name of inspector. In the range up to 100 gloss units the linearity is checked by means of 4 gloss standards (the maximum deviation permissible is 1 gloss unit).